Product Details:
Payment & Shipping Terms:
|
Dimensions: | 1.0-10mm | Melting Point: | 3410℃ |
---|---|---|---|
Technology: | Sintering /rotary Swaging | Hardness: | 20HRC |
Application: | Balance Weight, Shielding Parts, Military Industry | Tensile: | 3500-4000 |
Roughness: | Ra1.0 | Conditions: | Vacuum Annealed Or Un-annealed |
High Light: | 90WNiCu Tungsten Nickel Copper Alloy,Shielding Part Tungsten Nickel Copper Alloy,Tungsten Nickel Copper Alloy Plates |
90WNiCu Tungsten Nickel Copper Alloy Plates For Shielding Part 16.85~17.25 Density
Introduction of tungsten heavy alloy shielding part
Tungsten alloy shield is a device used to shield radioactive substances to avoid injury. It is ade of tungsten alloy material, it is a radiation shielding material that can be well used to replace lead and steel
Applications of Tungsten Nickel Copper Alloy:
First, WNiCu alloy can be used as shielding material, which has good absorption effect for X-ray and gamma ray, and is suitable for the field of ray shielding sensitive to magnetic environment;
Second, WNiCu is used as the electrical contact of high-voltage electrical switch and the electrode for electrical processing, which is mainly due to the strong conductivity and good high temperature resistance of the alloy;
Third, it is used as gyroscope rotor and some equipment that need to work in the magnetic field environment, because it has good diamagnetic performance;
Fourth, applied as various counterweights.
Properties of tungsten heavy alloy:
1. Good radiation shielding ability
2.Smaller volume and thickness
3.Good corrosion resistance, higher strength
4.Excellent machinability
Specifications of tungsten heavy alloy:
Chemical composition:
Composition |
90%W |
93%W |
95%W |
97%W |
|||||
State |
Sinter |
Vacuum |
Forge |
Sinter |
Vacuum |
Forge |
Sinter |
Vacuum |
Sinter/Vacuum |
Density(g/cc) |
16.85~17.25 |
17.15~17.85 |
17.75~18.35 |
18.25~18.25 |
|||||
Hardness(HRC) |
32Max |
30Max |
40Min |
33Max |
31Max |
40Min |
34Max |
32Max |
700Min/850Min |
Tensile Strength (Mpa) |
770Min |
900Min |
1400Max |
770Min |
910Min |
1440Max |
735Min |
920Min |
35Max/33Max |
Yield Strength |
620Min |
620Min |
1280Max |
650Min |
650Min |
1340Max |
650Min |
650Min |
~ |
Elongation(%) |
5Min |
15Min |
5Min |
12Min |
3Min |
3Min |
3Min |
12Min |
2Min / 6 Min |
Contact Person: Lisa Ma
Tel: 86-15036139126