Payment & Shipping Terms:
|Surface:||Ground And Clean||Dimension:||Customized|
|Name:||Molybdenum Bar||Application:||Vacuum Furnace Molybdenum Parts|
Pure Molybdenum TZM Bars,
99.95% Molybdenum Bars,
200mm Molybdenum TZM Bars
Introduction of Molybdenum Bar
Brand: mo1, TZM, MoLa
Standard: GB / t4188-1984
Surface state: black, alkali washed, car polished, polished.
Usage: molybdenum bars are mainly used for manufacturing electric vacuum parts, guide rods, electrodes, lead wires, high-temperature parts, furnace heating rods, etc.
Specification of Molybdenum Bar
|Forged molybdenum rod||>80mm||+/-2.0mm|
|Rotary forged molybdenum rod||10mm-25mm||+/-0.2mm|
|Machined molybdenum rod / bar||>20mm||+/-0.2mm|
|Straightening molybdenum rod||0.5mm-3.0mm||+/-0.03mm|
|Polished molybdenum rod/bar||0.8mm-50mm||+/-0.2mm|
Physical performance comparison between TZM alloy and Pure Molybdenum
|Material||Density (g/cm3)||Melting Point(℃)||boiling point(℃)|
|Mechanical property (TZM)||Elongation(%)||Elastic modulus(GPa)||Yield Strength (Mpa)||Tensile Strength(Mpa)||Fracture toughness(MP·m1/2)|
Classifications of Molybdenum Bars
Classification by material
1. Pure molybdenum rod: the molybdenum content is greater than 99.95%.
2. High temperature molybdenum rod (molybdenum lanthanum alloy rod): it contains 0.4 ~ 1.2% lanthanum, and the molybdenum content is the balance except impurities.
3. TZM molybdenum rod: 0.4 ~ 0.6 Ti. 07 ~ 012 Zr, 0.01 ~ 0.05C
Applications of Molybdenum Bars
① Molybdenum rod used for manufacturing electric vacuum devices and electric light source parts.
② Molybdenum bar is suitable for processing ion implantation parts.
③ Molybdenum rod is used as high-temperature heater and high-temperature structural parts.
4. Molybdenum rod is used as the electrode of furnace in glass and refractory fiber industry, working in 1300 ℃ glass melt, long life
⑤ Molybdenum bar is used as an electrode in the industry.
Molybdenum customized parts according to drawings are available.
Contact Person: Lisa Ma